advancetestmeasurement-logo

Advanced Test Measurement

Global Standards and Regulations for Advanced Test and Measurement

Advanced Test & Measurement Partnership Network aligns with international and North American standards to ensure quality and compliance.

Send an Inquiry

Driven by a shared commitment to innovation and compliance, the Advanced Test & Measurement Partnership Network brings together companies focused on delivering reliable, scalable technologies and services in the advanced test and measurement industries. We support organizations across sectors in meeting global standards and regulatory requirements through trusted, forward-thinking solutions. Our combined expertise fuels high-quality offerings, collaborative technology development, and exceptional customer support, positioning us as a leading B2B force across North America. Through coordinated marketing and sales efforts, we extend our market reach and foster collective growth. At the heart of our mission is a deep dedication to helping industries meet or exceed international, U.S., and Canadian regulations that shape the future of testing and measurement.

Standards and Regulations in Advanced Testing & Measurement

International Standards

ISO/IEC 17025 – General Requirements for the Competence of Testing and Calibration Laboratories

  • Issued by: ISO & IEC
  • Scope: Defines general requirements for the competence, impartiality, and consistent operation of testing and calibration laboratories.
  • Importance: Essential for laboratories that wish to demonstrate quality assurance and traceability.
  • Applies To: All testing and calibration facilities, regardless of the discipline (mechanical, electrical, chemical, etc.).

    • IEC 61010 – Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use

  • Issued by: IEC
  • Scope: Sets safety standards for design and use of testing and measurement instruments.
  • Covers: Electrical shock, mechanical hazards, fire hazards, and radiation.
  • Applies To: Oscilloscopes, spectrum analyzers, signal generators, and laboratory DAQ devices.

    • ISO 5725 – Accuracy (Trueness and Precision) of Measurement Methods and Results

  • Issued by: ISO
  • Scope: Describes methods to assess and report accuracy and repeatability of measurements.
  • Importance: Critical for laboratories developing or validating test methods.
  • Use Cases: Quality control, calibration, and inter-laboratory studies.

    • IEC 60068 – Environmental Testing

  • Issued by: IEC
  • Scope: Specifies methods to determine equipment reliability under environmental conditions.
  • Includes: Vibration, shock, temperature, humidity, corrosion testing.
  • Application: Electronic and electromechanical equipment.

    • ISO 9001 – Quality Management Systems

  • Issued by: ISO
  • Scope: Standardizes quality management principles including customer focus, process approach, and continual improvement.
  • Relevance to T&M: Required or recommended for certified labs or vendors.

    • IEC 61788 – Superconductivity – Measurement Standards

  • Issued by: IEC
  • Scope: Defines test methods for critical temperature, current density, and magnetic fields in superconductors.
  • Application: Research labs, quantum computing, cryogenics.

    • ISO/IEC 17025 – General Requirements for the Competence of Testing and Calibration Laboratories

  • Issued by: ISO & IEC
  • Scope: Defines general requirements for the competence, impartiality, and consistent operation of testing and calibration laboratories.
  • Importance: Essential for laboratories that wish to demonstrate quality assurance and traceability.
  • Applies To: All testing and calibration facilities, regardless of the discipline (mechanical, electrical, chemical, etc.).

    • IEC 61010 – Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use

  • Issued by: IEC
  • Scope: Sets safety standards for design and use of testing and measurement instruments.
  • Covers: Electrical shock, mechanical hazards, fire hazards, and radiation.
  • Applies To: Oscilloscopes, spectrum analyzers, signal generators, and laboratory DAQ devices.

    • ISO 5725 – Accuracy (Trueness and Precision) of Measurement Methods and Results

  • Issued by: ISO
  • Scope: Describes methods to assess and report accuracy and repeatability of measurements.
  • Importance: Critical for laboratories developing or validating test methods.
  • Use Cases: Quality control, calibration, and inter-laboratory studies.

    • IEC 60068 – Environmental Testing

  • Issued by: IEC
  • Scope: Specifies methods to determine equipment reliability under environmental conditions.
  • Includes: Vibration, shock, temperature, humidity, corrosion testing.
  • Application: Electronic and electromechanical equipment.

    • ISO 9001 – Quality Management Systems

  • Issued by: ISO
  • Scope: Standardizes quality management principles including customer focus, process approach, and continual improvement.
  • Relevance to T&M: Required or recommended for certified labs or vendors.

    • IEC 61788 – Superconductivity – Measurement Standards

  • Issued by: IEC
  • Scope: Defines test methods for critical temperature, current density, and magnetic fields in superconductors.
  • Application: Research labs, quantum computing, cryogenics.

    • United States Standards & Regulations

    NIST Handbook 150 – NVLAP Procedures and General Requirements

    • Issued by: National Institute of Standards and Technology (NIST)
    • Scope: Criteria for accreditation of testing and calibration laboratories under the National Voluntary Laboratory Accreditation Program (NVLAP).
    • Alignment: Based on ISO/IEC 17025.
    • Sectors: Electronics, mechanical, chemical, radiation, etc.

    ANSI/NCSL Z540.3 – Requirements for the Calibration of Measuring and Test Equipment

    • Issued by: American National Standards Institute / National Conference of Standards Laboratories
    • Scope: U.S.-specific requirements for calibration systems, traceability, and measurement uncertainty.
    • Often Required By: U.S. Department of Defense and aerospace contractors.

    MIL-STD-810 – Environmental Engineering Considerations and Laboratory Tests

    • Issued by: U.S. Department of Defense
    • Scope: Standardized environmental test methods for military equipment.
    • Includes: Temperature, humidity, shock, vibration, sand/dust, immersion, etc.
    • Used By: Defense, aerospace, rugged electronics industries.

    OSHA 29 CFR 1910 Subpart S – Electrical Safety-Related Work Practices

    • Issued by: Occupational Safety and Health Administration (OSHA)
    • Scope: Workplace safety standards for using test equipment around electrical systems.
    • Applies To: Any workplace using electrical test instruments.

    FCC Part 15 – Radio Frequency Devices

    • Issued by: Federal Communications Commission (FCC)
    • Scope: Regulations on electromagnetic emissions from intentional and unintentional radiators.
    • Testing Mandated For: Wireless products, RF equipment, digital devices.
    • Tools Used: Spectrum analyzers, EMI chambers.

    ASTM E2658 – Standard Guide for Fire Prevention for Photovoltaic Panels

    • Issued by: ASTM International
    • Relevance to T&M: Specifies fire testing practices that require thermal imaging, temperature sensors, and DAQ systems.

    United States Standards & Regulations

    NIST Handbook 150 – NVLAP Procedures and General Requirements

    • Issued by: National Institute of Standards and Technology (NIST)
    • Scope: Criteria for accreditation of testing and calibration laboratories under the National Voluntary Laboratory Accreditation Program (NVLAP).
    • Alignment: Based on ISO/IEC 17025.
    • Sectors: Electronics, mechanical, chemical, radiation, etc.

    ANSI/NCSL Z540.3 – Requirements for the Calibration of Measuring and Test Equipment

    • Issued by: American National Standards Institute / National Conference of Standards Laboratories
    • Scope: U.S.-specific requirements for calibration systems, traceability, and measurement uncertainty.
    • Often Required By: U.S. Department of Defense and aerospace contractors.

    MIL-STD-810 – Environmental Engineering Considerations and Laboratory Tests

    • Issued by: U.S. Department of Defense
    • Scope: Standardized environmental test methods for military equipment.
    • Includes: Temperature, humidity, shock, vibration, sand/dust, immersion, etc.
    • Used By: Defense, aerospace, rugged electronics industries.

    OSHA 29 CFR 1910 Subpart S – Electrical Safety-Related Work Practices

    • Issued by: Occupational Safety and Health Administration (OSHA)
    • Scope: Workplace safety standards for using test equipment around electrical systems.
    • Applies To: Any workplace using electrical test instruments.

    FCC Part 15 – Radio Frequency Devices

    • Issued by: Federal Communications Commission (FCC)
    • Scope: Regulations on electromagnetic emissions from intentional and unintentional radiators.
    • Testing Mandated For: Wireless products, RF equipment, digital devices.
    • Tools Used: Spectrum analyzers, EMI chambers.

    ASTM E2658 – Standard Guide for Fire Prevention for Photovoltaic Panels

    • Issued by: ASTM International
    • Relevance to T&M: Specifies fire testing practices that require thermal imaging, temperature sensors, and DAQ systems.

    Canadian Standards & Regulations

    CAN-P-4E – General Requirements for the Competence of Calibration Laboratories

    • Issued by: Standards Council of Canada (SCC)
    • Based On: ISO/IEC 17025 with Canada-specific supplements.
    • Scope: Establishes baseline for SCC-accredited calibration labs.
    • Importance: Required for labs providing certified measurement services in Canada.

    CSA C22.2 No. 61010 – Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use

    • Issued by: Canadian Standards Association (CSA)
    • Scope: Canadian adoption of IEC 61010 with national deviations.
    • Covers: Insulation, clearance, grounding, and marking of test equipment.

    CAN/CSA-ISO 9001 – Quality Management Systems

    • Issued by: CSA
    • Scope: Canadian-adopted ISO 9001 for quality assurance systems.
    • Application: Ensures conformity in Canadian testing laboratories and manufacturers.

    CAN-P-4E – General Requirements for the Competence of Calibration Laboratories

    • Issued by: Standards Council of Canada (SCC)
    • Based On: ISO/IEC 17025 with Canada-specific supplements.
    • Scope: Establishes baseline for SCC-accredited calibration labs.
    • Importance: Required for labs providing certified measurement services in Canada.

    CSA C22.2 No. 61010 – Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use

    • Issued by: Canadian Standards Association (CSA)
    • Scope: Canadian adoption of IEC 61010 with national deviations.
    • Covers: Insulation, clearance, grounding, and marking of test equipment.

    CAN/CSA-ISO 9001 – Quality Management Systems

    • Issued by: CSA
    • Scope: Canadian-adopted ISO 9001 for quality assurance systems.
    • Application: Ensures conformity in Canadian testing laboratories and manufacturers.

    ISED RSS Standards – Radio Standards Specifications

    • Issued by: Innovation, Science and Economic Development Canada (ISED)
    • Scope: Defines RF compliance and emission limits.
    • Key Standards:
      o RSS-210 – Licence-exempt RF devices.
      o RSS-Gen – General requirements.
      o RSS-247 – Wi-Fi and Bluetooth.
    • Testing Tools Used: RF power meters, spectrum analyzers, chambers.

    Z540.1 (Canadian Equivalent Use) – Traceability to NIST

    • While not formally Canadian, U.S. Z540.1/Z540.3 practices are often mirrored by Canadian defense/aerospace sectors when aligning with U.S. operations.

    Ready to collaborate in the test and measurement partnership network?

    Contact us today to explore partnership opportunities and help shape the future of collaborative testing and measurement solutions.

    Send an Inquiry
    advancetestmeasurement-logo

    Advance Test Measurement

    Our Consortium uses modern tools and data to accurately assess performance and improve decision-making.

    Quick Links

    Address

    324 W Main Street, Brighton, MI, 48116

    Map

    Copyright Advanced Test Measurement © 2025 All Rights Reserved